Make Your Own Courtyard Fountains And Ponds

Make Your Own Courtyard Fountains And Ponds
by Herb Daniels

Five thousand years ago, people began creating elaborate palaces and other dwellings using the beauty of courtyard fountains and ponds. Some of these decorative landscape showpieces have been the pride of kings and queens of Asia and Europe, as well as the nobility of such societies.

These days, such handsome attractions are not used by just the upper levels of society. Although they may seem somewhat costly to build, courtyard fountains and ponds are now available at prices that more enthusiasts can afford. As a result, lots of people are beautifying their domiciles with these additions. Happily these enviable showpieces can add value to a home.

Courtyard fountains and ponds are available in a limitless array of sizes and shapes. The variety of choices range from the simple to the very elaborate and complex and offer a wide selection of materials. A substance referred to as cast stone is very often the preferred material of choice.. This is a special kind of concrete that can be shaped into almost any form that is requested. However, many courtyard fountains and ponds are being made out of granite, other types of concrete and marble, which continues to be very popular.

Installing Courtyard Fountains and Ponds

It is certainly possible to put in your own courtyard fountains and ponds, but it is highly recommended that you hire a professional for this specialized type of work. However, if you should decide that this is a project you want to tackle on your own, you will discover that kits for smaller fountains and ponds are especially easy to install and are carried at many home improvement stores. When attempting an installation of your own fountain or pond, it is suggested that you follow several recommended steps.

Plant Stuff

Before you start installing your own courtyard fountain and pond, call the local electric utility company. This is essential. If you will not be using solar energy, these fountains will require electricity; and, their wires must be safely placed below ground. Since most people are not sure what is buried on every inch of their property, it is best to call and find out.

Next, you will need to clear out the area to be improved. The installation of a courtyard fountain and pond will be most successful if large rocks, plants and any debris is removed. Since the pond liner that you use may be somewhat fragile, you will help to ensure its integrity by getting these possible hazards out of the way ahead of time. You definitely don’t want anything falling into the hole and damaging the liner.

Such fountains need to be level for them to function properly. Therefore, you will need to level any holes for your courtyard fountain and pond. Sidewall stones should not be positioned until the leveling process is completed. The system will operate its best if the water is level. This ensures that the pump will operate properly. It is a simple operation to level the holes. Just fill up a hole with sand. Then, place a board on the sand and a level on the board. Until the the board is level at all angles, keep tamping down.

Finally, be sure to check out and follow the instructions that are packed with your courtyard fountain and pond kit. By being attentive and careful, you will end up with the display you desire – your very own lovely courtyard fountain and pond.

About the Author:

Permalink to ‘Make Your Own Courtyard Fountains And Ponds’

Click here for more information about 'Make Your Own Courtyard Fountains And Ponds'.

Category: Plant Stuff

Leave a Reply

%d bloggers like this: