Everything you need to create your own downdraft table, just add your own wood and filters! Build your own downdraft table and spare your wallet! This kit was custom designed to make it easy and affordable to get the airflow and suction necessary when creating your own in-home downdraft table. You’ll get the performance of a professional model at a price that won’t bust your budget! Hardware kit includes a plan; a quiet, prewired, fully-enclosed, fan cooled 3/4 HP motor; fan; custom air hood; prewired switch; finger guard; two 3′ casters; and mounting bracket. All you need to add is the wood and some furnace filters. The plan is for a table with a 24′ x 36′ work surface.The hardware kit includes pre-wired motor; fan; custom air hood; pre-wired switch; finger guard; mounting bracket; two 3′ casters; and Rockler’s Anti-Slip coating. A plan is also included. The Downdraft Table hardware kit is designed to fit into a compact cabinet. The 1700-rpm motor and fan draw air down from the work surface and through the filters, keeping shop dust to a minimum!Adding safety and security to areas from floors to miter fences is as easy as painting with our AntiSlip Coating. Simply roll on the coating with an opencell foam roller in one direction, allow to dry, then roll on a second coat in the opposite direction. It works on virtually any surface (even a porous surface) as long as it is clean and dry. The coating stays permanently elastic and flexible. Use on work surfaces to help hold projects in place. Nonflammable. Gray. Comes with the kit.Sold in pints.
List Price: $ 371.99
Price: $ 371.99
Some recent Rockler sales on Amazon:
Painter’s Pyramids work much like a board studded with nails, but unlike nailboards, they can be rearranged quickly for various pr…
This simple accessory prevents your tape measure from slipping off the corner while measuring diagonals. The 90 inside corner secu…
Clamp and align pocket hole joints faster, with better accuracy, and control! The Pock-it Hole Clamp with a new Quick Release feat…
Some recent Rockler auctions on eBay:
[wprebay kw=”rockler” num=”26″ ebcat=”11700″]
[wprebay kw=”rockler” num=”27″ ebcat=”11700″]
Question by spongerobert1: Anyone know where to get scematics of a simple bunkbed?
I’m not extremely profecient at carpentry but would like to build my kids a bunk bed.
All the websites I’ve tried are intent on selling me bunkbeds for hundreds of dollars.
I’m sure it’ll cost much less to just build one. We have the mattresses already.
By the way, is the term “scematics” even correct?
Answer by Aaron A
If you have the mattress just build a bed around it. Just check out some of the designs on line to get ideas and then draw one up. If you cant find wood deminsions you are lookind for dont forget you can glue and clamp multiple pieces together to add thickness for example 4×4 for the posts you just glue three 5/4 boards together to save money you could also do a post wrap hiding a post with 3/4 wrap then the rails could be a wrap also use demensional lumber as the frame and cover it with 3/4 oak this wil add strenght and give you the look you want. As far as the slats for the mattress 1×4 about 5 slats between the rail is more than sufficient. Make sure you give your glue a warm spot to dry for about 24 hours and use glue even when using screws because glue is stronger than wood.
Know better? Leave your own answer in the comments!
Click here for more info about ladders.