Discounted: Dremel 438-1/4-Inch 120 Grit Sanding Bands 6-Pack
Dremel 438-1/4-Inch 120 Grit Sanding Bands 6-Pack
This Dremel fine grit band is great for smoothing and shaping dog’s nails. Band fits Dremel 2-speed cordless grinder ZW77000 and also fits Dremel mini mite cordless grinder ZW77750. Uses fine bands to smooth rough or sharp edges, leaving a super-smooth finish. Comes in 6-pack. Measures 1/4-inch length.
- 1/4″ 120 grit sander band
- Fits 430 drum sander
- Rough shapes wood and fiberglass
- 6 per package
- Dremel fine grit band is great for smoothing and shaping dog’s nails
- Band fits Dremel 2-speed cordless grinder ZW77000 and also fits Dremel mini mite cordless grinder ZW77750
- Comes in 6-pack
- Measures 1/4-inch length
- Uses fine bands to smooth rough or sharp edges, leaving a super-smooth finish
List Price: $ 2.66
Price: $ 1.70
More Power Tool Accessories Products
Question by optcynbassist: what are some essential basic power tools for the home?
i’m talking about average tools to get general things done around the house. for example: i’ve heard table saws aren’t really practical because they take up too much space and a circular saw can do the same thing on a standard work bench. any suggestions?
Best answer:
Answer by cat lover
What level of repair and work? A electric screwdriver is considered essential by most. A miter saw is very useful, and is compact. Drills, of course, which often encompass screwdriver bits.
A circular saw can do some things a miter saw cannot do, but complement it.
Add your own answer in the comments!
Click here for more Power Tool Accessories info.
Permalink to ‘Discounted: Dremel 438-1/4-Inch 120 Grit Sanding Bands 6-Pack’
Related Posts
Discounted: Dremel 432 1/2″ 120 Grit Sanding Bands 6 Pack
Discounted: Dremel 710-05 160 Piece Accessory Kit.jpg)
DeWalt DASY3J8050 9-inch x 11-inch 800-Grit Waterproof Anti-Clog Sanding Sheet
Discounted: Shop Fox W1676 6-Inch by 10-Inch Combination Sander.jpg)
DeWalt DW8319 5 in. X 7/8 in. 120 Grit Zirconia T29 Flap Wheel.jpg)
DeWalt DW8331 7 in. X 5/8 in. -11 120 Grit Zirconia T29 Flap Disk- Discounted: Lufkin L510 1/2-Inch x 10 Hi-Viz 1/2 Orange Power Return Economy Tape Measure
.jpg)
DeWalt DW4333 6 in. 120 Grit Hook and Loop Disc.jpg)
Makita A-34481 3/8 x 21-Inch Abrasive Sanding Belts 10-Pack
More about Dremel 1550 T2 Versa Tip Multipurpose Tool Kit
.jpg&w=70&h=70&zc=1&q=90)
.jpg&w=70&h=70&zc=1&q=90)
.jpg&w=70&h=70&zc=1&q=90)
.jpg&w=70&h=70&zc=1&q=90)
Don’t make this same purchase mistake!,
On 08/06/2008, I purchased these sander bands at the same time I purchased the Dremel 750-02 Minimite 13,000 RPM 2 Speed 4.8-Volt Cordless Rotary Tool. However the sander bands do not fit this tool. Amazon’s Web-site did not clearly state otherwise.
MCox, San Diego, CA
Was this review helpful to you?
|Exactly what I expected.,
I ordered these in conjunction with the Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool. They fit exactly and work great! I use it sand down my dogs nails as it is less traumatic for them and helps to ensure I don’t get the quick. Fast shipping and will definitely order again when I run out.
Was this review helpful to you?
|Worth the money,
We added 1/4″ 120 grit and 1/2″ 120 grit sanding bands to our cart when we purchased our 7300 4.8 volt Pet Dremel. It has already paid for itself since we no longer have to take the dog to the groomers to get her nails done once a month. These bands are easy to replace and the dremel works well and stays charged. It is not too loud. We have to keep the dog occupied with treats to get it done and had to slowly acclamate her to the use of this but worth the work and worth the money!!! Order extra bands so you don’t have to pay for shipping twice!!!
Was this review helpful to you?
|Start with a “Work Mate” — a folding workbench that also clamps the work. Add the optional clamp accessories.
A good 8″ circular power saw.
One fine carbide tooth blade
One carbide tooth combination blade
A cordless drill and good set of drill bits
A 1/2″ corded drill for heavier work.
From there, it depends on the kind of work you plan to do.
A Router with some basic bits lets you do some fancy work.
I wouldn’t want to be without my HD jig saw
A lighter duty scroll saw is pretty handy
Interestingly you asked only about power tools but the most useful tools around my house are not powered.
24″ crosscut hand saw
24″ carpenter’s square
1″ x 25″ tape measure
a chaulk line
Set of wood chisels 1/4″ to 1″
Set of cold chisels
Center punch
Good set of about a dozen screw drivers with big handles NOT those darned multi-blade things
Small, medium and large needle nosed pliers
Medium and large channel lock pliers
Straight and curved jaw Visegrip pliers
Medium-sized slip-lock pliers
S, M, Lg. forceps
Hack saw
Heavy Duty utility knife
Left curve and straight compound cutters
Sturdy, fine-tooth back saw
Wire stripper (the small, cheap kind works best)
16 oz. curved claw hammer
16 oz. ballpean hammer
A vise or other holding device
Several pairs of C clamps
6″, 10″ and 12″ “crescent” wrenches
10″ or 12″ Lineman pliers
Barb-wire fencing tool (great for holding, bending, cutting and twisting wire, putting in tacks, pulling staples,)
6″ and 10″ flat pry-bars
I could go on but one tip: when you have a job to do and don’t have the right tool, don’t improvise; go out and buy the right tool. In that way you build up an inventory of tools to tackle most any project.
Drill sawsall flashlight… hammer assorted screw drivers vise grips adjustable wrench circular saw dykes tape measure… of course specific jobs may require special tools but as a basic for diy tasks those tools are my most frequently used
Get tools (hand and power tools) as you need them based on the job at hand. Why accumulate tools you may never need?
Basic tools wrench or socket set pliers pipe wrench or channel locks for say plumbing skill saw or even better a saws all with metal wood blades or jig saw drill battery style mufti use for straight drilling or driving in screws, hammers and basic screw driver sets and a electrical circuit tester in case outlets go out and a stud finder for hanging heavy pictures or items on a wall and a small level such as a torpedo level for hang pictures etc
hope that helps
Lr
Depends what you want to get done. Some of us can go years not needing a circular saw or table saw. The one power tool I wouldn’t want to be without is a cordless screw gun powerful enough to be useful as a drill.
In home a extension cord. I do not buy battery tools. 1/2 inch drill, circular saw if doing carpentry work. jig saw for light fancy work. Hand tools for most else. good drop light. tape measure, carpenter pencle, Saw and drill are the 2 basic tools. Buy good ones.
Drill/Driver with a clutch
Impact Driver
Hammer Drill for cement
Circular saw (7 1/4 inch blade)
Jig Saw
Reciprocating saw
Angle Grinder for metal work.
And hand tools
All sizes of screwdrivers
Crescent wrench
Side cutters (wire cutters)
Slip joint pliers
Jab saw
Back cut saw
Miter saw
Miter box
Tape Measure
Pump pliers
Needle nose pliers
Tommya had the best answer – don’t buy tools until you need them. Obviously start with a simple screwdriver (the kind with multiple tips built into it are the best) and a hammer.
Of course, you will be forced to buy some power tools at some point. Battery vs Electric is the biggest debate. Electric – more power, don’t need to charge batteries. Battery – more versatile, less messy chords, no extension chords to reach things 100+ ft away from house.
I personally went the battery route because I don’t use power tools that often or for extended periods of time. I also only buy the same brand (Dewalt) because they all take the same batteries (other tool brands also do this). Now when I need a new tool I just buy one without the battery and save $ 30-$ 40.