Discount: Milescraft 1302 Drive90 Right Angle Drilling and Driving Power Drill Attachment with 1/4-Inch Hex Quick Change Drive and Magnetic 1/4-inch Socket

Milescraft 1302 Drive90 Right Angle Drilling and Driving Power Drill Attachment with 1/4-Inch Hex Quick Change Drive and Magnetic 1/4-inch Socket

Milescraft 1302 Drive90 Right Angle Drilling and Driving Power Drill Attachment with 1/4-Inch Hex Quick Change Drive and Magnetic 1/4-inch Socket
Reach into awkward corners and difficult angles with the Drive 90, a compact, -angle screw driver attachment. Drive end has the industry standard 1/4″ shaft that inserts into your quick connector or can be chucked directly into your /driver. Opposite end has a that accepts ordinary hex shank bits so you can bits with a flick of the wrist. Built tough for any DIY project around the house but is equally at home in the shop, both in terms of durability and performance. Delivers a maximum 100 inch/ lb. of torque at 400 rpmThe Milescraft is a right-angle drill drive attachment, featuring a 1/4-inch hex . This standard 1/4-inch hex input shaft accepts and holds all standard 1/4-inch driver bits and will fit any drill. The Drive90 includes 3 of the most common bits: the #2 straight; the #2 Phillips; and #2 square head. It also features a compact head design, ideal for close-quarter . The gears are housed in a die-cast zinc body and

  • Compact 1.25 inch profile at a true 90 degree angle from the drill or driver gets into confined spaces
  • Gears housed in die cast body with 3 sets of ball bearings for long lasting durability
  • 1/4 inch hex drive shaft is quick change compatible and fits most drill and driver chucks
  • Magnetic 1/4 inch hex socket accepts and holds standard drill and driver bits
  • Includes bonus 1/8 inch Stubby Drill Bit and 3 one inch slotted, phillips and square driver bits

List Price: $ 19.99

Price: [wpramaprice asin=”B000KICSGQ”]

Similar tools from eBay: [wprebay kw=”power+tool+accessories” num=”12″ ebcat=”11700″] [wprebay kw=”power+tool+accessories” num=”13″ ebcat=”11700″]

More Power Tool Accessories Products

Borderlands 2 Heads And Skins DLC Brings Out Your Inner Duck Hunter
Steampunk clothing and a lightbulb hat are the Mechromancer’s new accessories. Maya and Zer0 are transformed into a glam rocker and ninja/power tool hybrid, respectively. The head and skin packs cost 80 Microsoft Points / USD $ 0.99 / GBP £0.79 / EUR 0 …
Read more on Cinema Blend

 

Click here for more Power Tool Accessories info.

This article sponsored by painter kelowna
.

Tags: , , , , , , , , , , , , , , , , , , , , , , ,
Previous Post

Stanley black chrome 69 pc socket set 92-824

Next Post

Little Giant Megalite Demo

Comments

    • E. G.
    • July 8, 2013
    32 of 32 people found the following review helpful
    3.0 out of 5 stars
    Drive90 worked well until…, May 13, 2007
    By 
    E. G. (CA) –

    This review is from: Milescraft 1302 Drive90 Right Angle Drilling and Driving Power Drill Attachment with 1/4-Inch Hex Quick Change Drive and Magnetic 1/4-inch Socket (Tools & Home Improvement)

    This attachment works well if you ignore the grinding noise from the mechanism. It will not make the noise if you hold it just so but it’s difficult to do so. DO NOT be tempted use it with an impact driver. That’s how I broke mine (stripped the mechanism) an impact driver is too much for the tool unless you dril pilot holes. For driving screws in low torque applications it does fine. If you are driving screws into hardwood with an impact driver and no pilot holes, be prepared to break it as this tool will not be able to handle the touque. I would only recommend this tool for occasional use.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

    • Atlanta Network Guy
    • July 8, 2013
    25 of 25 people found the following review helpful
    4.0 out of 5 stars
    OK but could be better – sloppy design feature, November 5, 2011
    By 
    Atlanta Network Guy (Atlanta, GA United States) –

    Amazon Verified Purchase(What’s this?)
    This review is from: Milescraft 1302 Drive90 Right Angle Drilling and Driving Power Drill Attachment with 1/4-Inch Hex Quick Change Drive and Magnetic 1/4-inch Socket (Tools & Home Improvement)

    Even before I put this in a drill I could tell there would be some trouble and I would have to be careful with it. There is a property of gear mesh called wink, and this 90 degree drive design allows it to vary. When you put any pressure on the shaft which chucks into the drill, it causes the gears to mesh together and jam. When you pull back on the shaft, it pulls the gears too far apart, which will cause the stress to all be on the outermost part of the teeth and cause premature wear. If they had spent one more dollar putting in a thrust plate and washer, it would have kept the gear spacing, or wink, constant, which would have been ideal.
    That said, this does the job, you just have to be careful not to push the power drill hard into the tool when you use it. I usually give tools that just barely do the job only three stars (I buy and rate a lot of tools at Amazon), but because this is the smallest profile 90 degree drill adapter I have ever used or even seen, I am giving it an extra star for that.
    This, in combination with the stubby drill bits I also purchased, allows me to drill in the smaller spaces than any other 90 degree drill tool I have, and I have several.
    The magnetic hex base allows the use of both snap lock hex drill bits and the small hex multi-tool screwdriver bits as well. It is not a snap-lock tool, it depends on a magnet at the bottom of the hex shaped hole to hold the bits in place. This does cause the bits to stick further out of the tool than a true snap lock check would, but that is part of the tradeoff for the small profile of the tool.
    The drill bit supplied with mine is out of true, meaning the tip makes a circle when you spin it. Its the same effect as if the bit was bent. Its worthless and I’ve thrown it away, but it wasn’t much of a feature anyway. I didn’t buy the tool for the drill bit that came with it.
    Overall, I like it because it fits in tight places, but I do wish they had spent the extra little bit to hold the drive shaft in place and thus had constant gear wink, had that been done I would have called it excellent and given it five stars. Unfortunately, adding a thrust plate and washer is not a modification you can easily retrofit in a home workshop, it has to be designed into the tool. For that reason, I expect to have to replace it a few years, maybe by then they will have a new model that doesn’t have this one defect.

    Help other customers find the most helpful reviews 

    Was this review helpful to you? Yes
    No

Leave a Reply

%d bloggers like this: