Reviewing: PSI Woodworking DBGULP Big Gulp Dust Hood

PSI Woodworking DBGULP Big Gulp Dust Hood

PSI Woodworking DBGULP Big Gulp Dust Hood
PSI Woodworking’s Big Gulp dust hood has a large 13-by-16-inch opening. It’s an ideal hood for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods. It’s lightweight and portable and has a tough ABS plastic construction. The 4-inch port to connects to any dust collection system.

  • Dust hood with a 13-by-16-inch opening
  • Perfect for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods
  • Lightweight and portable; produced from tough ABS plastic
  • 4-inch port to connect to any dust collection system
  • Weighs 2.2 pounds

List Price: $ 19.84

Price: $ 17.79

Related Woodworking Shop Products

Question by Arn Amag: Where to buy untreated small blocks of wood in Albuquerque?
Hello there, I have recently gotten into the habit of carving pipes, but have been limited to the sub par woods I have in my backyard. I was wondering if there are any hobby shops in the area that sell things like Briarwood, Olive, or Cherry, as well as any other good pipe woods that I may have missed. I have checked out the big name locations, Lowes, Home Depot, and Hobby Lobby and have been unable to find good, untreated wood for sale anywhere. Any ideas?

Best answer:

Answer by MrNoitaul
Try custom cabinet shops, sawmills, any woodworking shop.

What do you think? Answer below!

Click here for more Woodworking Shop info.

Permalink to ‘Reviewing: PSI Woodworking DBGULP Big Gulp Dust Hood’

Category: Product Reviews

2 Responses to “Reviewing: PSI Woodworking DBGULP Big Gulp Dust Hood”

  1. Pablo Skye
    24 of 25 people found the following review helpful
    3.0 out of 5 stars
    Fair, August 22, 2009
    By
    Pablo Skye (Berkeley, CA) –

    Amazon Verified Purchase(What’s this?)
    This review is from: PSI Woodworking DBGULP Big Gulp Dust Hood (Tools & Home Improvement)

    I bought this to catch dust from a sliding compound miter saw. By itself it gets about 40 percent of the dust. I built a catch-box out of 1/4-inch plywood that employs the Big Gulp Hood as a funnel into the central dust control system. The catch-box, which works, is probably 10 times the size (in area) of the Big Gulp. Nothing as small as the Big Gulp is going to be as effective as it needs to be at any stationary tool that kicks dust in all directions.

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

  2. Marcelo C.
    17 of 18 people found the following review helpful
    3.0 out of 5 stars
    Good concept, needs modifications, March 27, 2010
    By
    Marcelo C. (California, USA) –

    Amazon Verified Purchase(What’s this?)
    This review is from: PSI Woodworking DBGULP Big Gulp Dust Hood (Tools & Home Improvement)

    So I purchased this item almost a year ago, and after trying different methods I have come to a conclusion that this is a great item IF you have time to modify it.

    I had no problem attaching it to my existing system. Where I did run into problems was figuring out a way to get all or most of the dust into the Big Gulp. I feel that the only way this will absolutely work 100% is to make a larger than necessary box to go around the miter saw and place the Big Gulp behind and beneath the saw. I find that even with 1250 CFMs it does not create enough suction to draw everything my compound miter saw spits out. At the end of each day I am shoveling mounds of saw dust over to it and shovelling it in! I am limited to space in my current set up, however, at one point in time I had thought of using it as a makeshift downdraft table system for sanding and jog saw cutting. It seems as to me that if you don’t have enough room to place this item in the correct spot then it will not work as you intended…

    Just my $0.02…

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

Leave a Reply

%d bloggers like this: