Check out: DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector


DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector

DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector
Help protect your health with the Delta 50-760 1-1/2-Horsepower, 1,200-CFM Dust Collector. Thanks to one-micron filtration bags, a powerful motor, replaceable dust ports, easy maneuverability, durable construction, and more, the 50-760 provides dependable dust collection for a clean work environment. And even with its powerful suction capability, this dust collector is surprisingly quiet.
The Delta 50-760
1.5-HP Dust Collector
At a Glance:1-micron filtration bagsPowerful TEFC induction motorTwo 4-inch dust ports, one 5-inch main portSnap-in bag rings

Unique, volume-saving vertical design and easy-gliding wheels offer maneuverability.Keep Your Shop Safe and Clean
With two four-inch replaceable dust ports and an upper filter bag that has the ability to filter out pollutants measuring just one micron in size, this dust collector efficiently extracts fine, invisible dust particles from the air. Much airborne dust–including wood dust–contains chemicals that can trigger

  • Standard 1 micron filtration bag keeps your shop safer and cleaner
  • Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps
  • Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust
  • 6 mil plastic chip collection bag shows you when the bag needs emptying
  • Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way;

List Price: $ 724.50

Price:

More Amazon deals:

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill
Enjoy the precision ground dovetail column that allows for fast and easy tool changes without having to re-register the spindle centerline. The Z-axis handwheel with the fully geared lift system easily lifts and lowers the headstock up to 14-3/4″. A 3/4 HP reversible variable-speed universal motor drives an all-steel geared Hi/Lo range gearbox which drives the 60mm diameter quill and R-8 spindle. The precision ground cast iron milling table with coolant troughs and drain will accept an aftermarket coolant system and power feed. These features combined with the outstanding X and Y table travel of 5-3/4″ x 15-1/2″ make the M1110 Mill/Drill one of the most popular units available.

  • Number of lathe speeds: 12
  • Cross slide table
  • 4-way turret tool post
  • Steady rest
  • Follow rest

List Price: $ 1,590.00

Price: $ 1,760.00

Similar tools from eBay: SHOP FOX(R) 1/4 HP Power Feeder - W1765

$648.00
End Date: Tuesday Nov-4-2014 9:44:53 PST
Buy It Now for only: $648.00
Buy It Now | Add to watch list
SHOP FOX(R) 1/3 HP Benchtop Lathe - W1704
$196.00
End Date: Monday Nov-3-2014 12:24:53 PST
Buy It Now for only: $196.00
Buy It Now | Add to watch list



Click here for more Woodworking Shop info.

Category: Product Reviews

4 Responses to “Check out: DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector”

  1. DenverGarage
    154 of 157 people found the following review helpful
    5.0 out of 5 stars
    Very Nice Inexpensive Dust Collector, June 9, 2005
    By
    DenverGarage (Denver) –

    This review is from: DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector (Tools & Home Improvement)

    I was going to get the Delta 50-850 but this one includes standard 1 micron bags so I decided to get the 50-760 instead. Set up took about 15 minutes including fumbling with the bag and the exterior band strap. Delta includes an interior flexible band & a band strap to mount the bottom bag with. I suppose out of habit I used the band strap but the flex band seems a lot easier and I will probably switch bag mounting methods next time I empty it. The unit runs a lot quieter than I had imagined and seems to have more than enough power to collect the dust from my shop. With 2 clear chip bags 1 micron collection and the cfm rating this machine is hard to beat. I do not see having to upgrade to anything larger.

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

  2. George
    79 of 79 people found the following review helpful
    5.0 out of 5 stars
    No problems …. great unit, February 13, 2006
    By
    George (Texas) –

    Amazon Verified Purchase(What’s this?)
    This review is from: DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector (Tools & Home Improvement)

    I received my 50-760 late last year. Even though I have been receiving items damaged from Amazon, the dust collector made it without any problems at all.

    Assembly was a snap, fit and finish was very good.

    I am still running the DC at 120v, but will be wiring to 240v after I put in the 240v outlet.

    I currently use the DC in a ducted metal pipe environment. I come off vertically with 6 inch spiral pipe (5 inch to 6 inch expander from machine), run up to ceiling, run over 16 feet, then head down to the floor with 5 inch pipe. I have multiple branches off this vertical pipe, and run 5 inch hose to the woodworking machines via home-made blast gates. Eventually I will expand the system to other machines, but since the existing ductwork and run lengths are the longest that I will be using, there is absolutely no doubt in my mind that the future enhancements will also work just as good as the existing hookups.

    Performance with the above set-up is great. I have great airflow and suction, and the amount of dust and sawdust has been reduced tremendously in the woodshop.

    Noise level is not a problem. While not quiet, the noise level is less than my shop vac was. Since the DC is in a corner of the woodshop, it is at least a fair bit away from me. Eventually I will add a wooden panel or two around the unit to block some of the direct noise.

    I am glad that I purchased the unit. It handles my woodworking needs at a low cost and with a small footprint. No regrets on purchasing the unit.

    I can’t wait to hook up the rest of my machines!

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

  3. steve
    1 of 1 people found the following review helpful
    5.0 out of 5 stars
    bench top mill, September 10, 2012
    By
    steve

    Amazon Verified Purchase(What’s this?)
    This review is from: SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill (Tools & Home Improvement)

    i use it almost every day and i am very happy.it is better than i expected two thumbs up!it has already paid for its self.

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

  4. Anonymous
    3.0 out of 5 stars
    Good home project machine, August 10, 2013
    By

    Amazon Verified Purchase(What’s this?)
    This review is from: SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill (Tools & Home Improvement)

    This machine is capable of turning out usable but not great parts out of the crate.
    The motor is strong and reasonably quiet and produces enough torque to make 0.250 cuts in 6061 T6 with a 5/8 end mill.
    My gear box is a bit noisy in low range, has a slight knocking noise that sounds like one rough tooth on a gear. Cleaning and re greasing the gears did not provide any reduction in noise levels, and there was no visual defect that could account for the noise in the gear set.
    My machine required a couple of hours of adjustment to tram the dovetail column, adjust all of the gibs and set backlash.
    After 10 hours of operation I am having problems with backlash in excess of 0.012 on both X&Y axis, the manufacturer’s documentation states 0.003 at the hand wheel is obtainable. The feed half-nuts on my machine do not adjust properly and will require replacement or modification to allow adjustment to the published specification.
    If you like to tinker this machine can be tweaked and tuned to produce some very impressive results. A quick search of Youtube for Seig SX or Grizzley G0463 or G0619 (all appear to be clones with different color schemes & brands) will turn up numerous CNC modified machines of this class in action.

    Things I would like to see improved/Modified
    1. Correct the hand wheel scales, one inch should = 1.000 not 0.996.
    2. Redesign the feed screw Half-Nuts to adjust properly.
    3. Add a hand wheel to the left end of the X axis.
    2. Make the hand wheels removable.

    Recommendations:
    1. Clean off all of the shipping preservative and apply a good quality lube/ corrosion preventative to all bare metal parts.
    2. Loctite the power and direction selector screws before they vibrate out and disappear.

    Modifications I have made:
    1. Added DROs, even the cheap ones add a level of repeat-ability the basic machine lacks.
    2. Added LED lighting to the under side of the gear box, one 24 LED panel to each side of the quill greatly improves visibility.

    For the price it is a good machine even if it needs some finish work. Space required is not unreasonable for a home shop / garage.
    The machine is heavy for its size, you will need a sturdy, level mounting area and a mobile hoist or several friends with strong backs to move it and set it up.
    I built a mobile base with heavy casters so my mill can be stored out of the way and moved to any place in my garage to accommodate the size of the project.
    Power requirements, standard 115/120 VAC wall outlet , no 3 phase power or pricey extras required.

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

Leave a Reply

Wordpress SEO Plugin by SEOPressor