A tree should be inspected on a regular basis, especially before and after a storm arrives. A bigger tree has a greater danger potential as opposed to a smaller tree. A dangerous tree with significant structural defects is likely to fail, and could possibly result to damage to properties and/or injury to people and/or pets nearby. This why it is vert important that you are aware of alarming signs of a hazardous tree.
The things which could affect a tree’s health are but not limited to: past tree care, landscape and construction activities.. Trenches, constructions, and tree topping could all have negative effects on a tree. If the roots have been disturbed or cut, the tree could be unstable.
A tree doesn’t have to grow straight up. But a tree with a significant lean may imply that there’s a problem. Check if there are exposed roots and/or cracked soil surrounding the base of the tree. Things things may indicate that it has begun to lean.
3. Multiple Trunks.
Some trees develop more than one trunk. The multiple trunks of a tree could break if they are not attached well. A tree with a large trunk with cracks has high potential for failure. Inspect a tree for splits when trunks are linked.
4. Weakly Attached Branches.
Check on the branches where they are attached to the trunk of a tree. Tight V-shaped links are more highly prone to breakage as opposed to open U-shaped connections. Also, a tree with cracks, splits, and/or a number of branches arising from the same area on the trunk may present problems.
5. Decay and Cavities.
Check the branches and/or the trunk for hollow or decayed areas, and peeling bark. Significantly huge decay spots and decay on sections where branches connect with the trunk, may imply serious problems on the tree’s structure. Mushrooms growing on or at the tree’s base can be signs of decay.
6. Branch and Trunk Splits or Cracks.
Check the the large branches and the trunk for splits. Big and deep cracks or splits could mean structural weakness and the need for careful evaluation.
These are broken branches that are still partly attached to the tree. Whether partially or fully separated from the tree, hangers would most likely fall unexpectedly and thus they ough to be removed as soon as possible. Also, stubs left by such broken branches must be removed in order to prevent the spreading of decay.
These are are the dead branches. They have to be detached from the tree, as they’ll eventually fall. Branches over 2 inches in diameter may cause severe damage or injury when they fall, especially when they fall from a relatively high altitude.
If you see one or more of the discussed warning signs in your tree, contact a tree service company immediately and receive professional help in tree removal Perth. Check out the website of WA Tree Works to meet qualified and highly trained and skilled tree loppers and tree pruners: WATreeWorks.com.au.