Discount: Shop Fox D2271 Heavy-Duty 9 Roller Table

Shop Fox D2271 Heavy-Duty 9 Roller Table

Shop Fox D2271 19 x 65-Inch Heavy Duty Adjustable 9-Ball Bearing Roller Table
  • Item may ship in more than one box and may arrive separately
  • 1,000-Pound capacity
  • Four independently adjustable legs
  • Height adjusts from 26-3/8-Inch to 44-1/8-Inch
  • 9 Ball-bearing rollers
  • One-year warranty

List Price: $ 211.85 Price: $ 210.23

Similar tools from CJ:

“3M Scotch 1/2″” x 60 yds. x 6.7 mil Masking Tape 214, Tan, 6/Pack”


“6.7 mil thickness, Easy tear, pressure sensitive, Backing material: Crepe Paper, Roll size: 1/2″”(W) x 60 yds.(L), Color: Tan, Diameter: 5.3, Elongation: 10%, Industry use: Automotive, electronics, furniture, general industrial, metal working, military and government, specialty vehicle, transportation, woodworking, Adhesive material: Rubber, Operating temperature: 177 deg C, Certifications and standards: ASTM D 6123, D 6123M-97; Freight class: 50, Shelf life: 12 Month, Ideal for use on aluminum anodized surfaces for clean removal, Natural rubber adhesive for good instant adhesion, heavy thickness crepe paper backing for good paint lines, Withstands bake cycles of up to 350 degrees F. for one hour, Sealing, holding, bundling, reinforcing, identifying, tabbing, wrapping, paint masking, splicing and protecting, 6 rolls per case”
List Price:
Price:

Find More Woodworking Shop Products

Click here for more Woodworking Shop info.

Permalink to ‘Discount: Shop Fox D2271 Heavy-Duty 9 Roller Table’

Category: Product Reviews

3 Responses to “Discount: Shop Fox D2271 Heavy-Duty 9 Roller Table”

  1. Jerry Robison
    25 of 25 people found the following review helpful
    4.0 out of 5 stars
    Good choice for the construction site, July 17, 2004
    By
    Jerry Robison (Silicon Valley, USA) –

    Verified Purchase(What’s this?)
    I am a residential general contractor. My current project requires that I cut dimensional lumber with lengths of 20 and 24 feet. Previously I had been using one of those single-roller stands that folds up, whether you want it to or not. I wanted something that would be safer, sturdier, more predictable. Of the options I decided to experiment with the Fox Roller Table. I think perhaps this equipment is good for both construction or for light industrial factory and warehouse. I had some initial skeptism, but have found it to be a good investment. First the positive comments… Being a table with multiple rollers, rather than a single roller, the work lays flat and does not crash off balance. It is easy and effortless to slide the work under the saw and back again. I don’t worry about accidents with this table. Now the neutral comments…The design lacks bracing, so it has substantial torsional flex and it can rack. Under extreme lateral loading, legs may collapse. I would not characterize it as heavy duty, but light to medium duty design. Second, the equipment came partially assembled. However, because of the design, it became further disassembled during shipment. After spending some time putting it back together it seems to be ok and will hold. Height adjustment is via collar clamps around tubular legs. The clamps are plastic, life expectancy uncertain. Third, I was hoping for design that could be broken down quickly for storage and portable around a construction site. However, this table requires some patience to set the height and level, and it does not collapse for storage. Instead I have set it up on a flat level slab and just leave it in place. This compromise turned out to be most convenient for me anyway. In summary this roller table was a good choice for supporting work on my level construction site.

    0

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

  2. Gary Rudell Elwell
    24 of 25 people found the following review helpful
    2.0 out of 5 stars
    Leaves a lot to be desired……………, February 3, 2001
    By
    Gary Rudell Elwell (North Augusta, South Carolina United States) –

    This review is from: Shop Fox D2271 Heavy-Duty 9 Roller Table (Tools & Home Improvement)
    I just received and assembled my Woodstock Nine Roller Table and I must say the Engineering dept. must have been on vacation when this thing was designed. First, the roller shafts are held in place by plastic caps rather than a groove and an “E” clip. One of mine was dislodge in shipping and the cap is broken. Second, I had to use a spanner wrench to align the bolt holes to attach the legs. Third, the legs are lightly tacked to the “U” channel members and I do mean lightly. Fourth, it is HEAVY….which could present a problem in a small shop. Fifth, one of my rollers is binding so I basically have an 8 roller table. After I weld the legs and put it on lockable casters I might be able to use it.

    0

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

  3. Harold Tichenor
    7 of 7 people found the following review helpful
    1.0 out of 5 stars
    not impressed, May 18, 2012
    By
    Harold Tichenor (Bowen Island, BC Canada) –
    (REAL NAME)

    Verified Purchase(What’s this?)
    This review is from: Shop Fox D2271 Heavy-Duty 9 Roller Table (Tools & Home Improvement)
    I bought one of these recently and found it was less well built than less expensive ones from other suppliers. Came completely disassembled and without instructions. Cheap plastic leg retainers, two of which were already split on arrival.

    0

    Help other customers find the most helpful reviews

    Was this review helpful to you? Yes
    No

Leave a Reply

%d bloggers like this: