Rockler/Insty-Drive 18 Piece Set

Learn more: Switch from drilling to driving in seconds. This deluxe set includes self-centering bits, countersi…

Rockler Complete Dovetail Jig

Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler’s exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2″ to 3/4″ thick stock. Jig will cut half-blind dovetailed joints from 1/2″ to 1-1/8″ thick and full through dovetails from 3/8″ to 3/4″ thick. Accommodates stock up to 11″ wide.

Requires router with 1/2″ collet.
8mm diameter bits are 25% larger than typical 1/4″ bits, reduce chatter and fit all existing Rockler dovetail jigs.
Preset template and fence locations clearly marked for standard thickness stock.
Clamping bars include abrasive surface to grip stock and prevent slipping.
Depth gauge on template for setting dovetail bit height for half-blind joints.

Complete Dovetail Jig Includes:

Two durable phenolic templates
Three 8mm shank carbide-tipped router bits (1/2″ x 14deg dovetail, 1/2″ x 8deg dovetail, 5/16″ straight)
1/2″ to 8mm collet adapter
7/16″ guide bushing fits most routers
Detailed eight-page instruction booklet
Quick reference guide for standard joints
List Price: $ 164.99
Price: $ 99.99

Most popular Rockler Amazon products:

Rockler 4′ Universal T-Track Kit
Outfit your workbenches, jigs, or machine tables with the ultimate accessory track! Universal T-Track boasts a unique stacked-slot…

Rockler Deluxe Hold Down Clamp
These Deluxe Hold-Down Clamps feature non-marring rubber tips that are ideal for working with soft woods, pre-finished panels, or …

Rockler Square Check for Tape Measures
This simple accessory prevents your tape measure from slipping off the corner while measuring diagonals. The 90 inside corner secu…

Rockler on eBay:

Click here for more info about ladders.

Tags: , , , , ,
Previous Post
Product Reviews

Discounted: DEWALT DC970K-2 18-Volt Drill/Driver Kit

Next Post
Product Reviews

Discount: Little Pink Drill 18V


    • Alfredo Isaac
    • July 4, 2014

    Hi, I got my order for the 9pc Insty-Drive item # 69030 and the Quick
    Change Chuck item # 69015 and I’m a bit confused. Can I use the chuck
    safely to drive in the screws like you show in the video with the aluminum

    • RocklerWoodworking
    • July 4, 2014

    You could use it to drive screws, but I wouldn’t recommend it. The sleeve
    is the best option.

    • RocklerWoodworking
    • July 4, 2014

    You can request USPS when ordering.

    • Alfredo Isaac
    • July 5, 2014

    Sorry, perhaps I did not explain myself clearly. The video shows the
    aluminum sleeve to drive in the screws and not the chuck, but I ordered the
    chuck and not the sleeve, and the legend that came with it reads in part
    quote Accepts all 1/4 (6mm) quick change hex shank accesories unquote and
    this is where I am confused as whether to use it to drive the screws in or
    not, in which case I would have to order the sleeve.. Regards.

    • Alfredo Isaac
    • July 5, 2014

    Very smart, do you sell this anywhere in México ?

Leave a Reply

%d bloggers like this: